artcontinent.com Odd Cameras Holgamods 612 Pan
This is a Holgamods 612 Pan wide
landscape camera in 6x12cm format. It's custom made by Randy from
Holgamods on the base of a Holga WPC 6x12 pinhole camera. You have to
send him a Holga WPC and a large format wide angle lens. As I had the
Holga and an old Schneider lens, he made one for me. The 90mm Angulon
lens was designed for 9x12cm format, which is near to 4x5 inch format,
it's a small and lightweight lens and has an excellent reputation. This
one is very old, it's from 1949, lens and shutter still work
fine. A page about the Holga WPC you will find here
(link opens in a new widow). In most cases the camera is ordered with a
rangefinder. In those cases the rangefinder and the lens are
calibrated. I don't need one, by a misunderstanding the lens was not
calibrated at all, so I did it myself.
Focal length: 90mm
Body: an old Holga WPC
Aperture: 6.8, 8, 11, 16, 22, 32
Shutter: Compur - Rapid, 1/400, !/200, 1/100, 1/50, 1/25, 1/10, 1/5, 1/2, 1, B
front. The white markings were made by myself, it's 6m, 3m, 2m, 1.5m
and 1m. The camera focusses down to 0.65m. Camera set to 3m hyperfocal.
back, Red window. Remember that it's 1, 3, 5, 7, 9 and 11 to be in the red window.
Camera bottom. Tripod screw.
Camera interior. This is the original pinhole camera mask. It does not work with a wide angle lens.
This is what you get with the original mask, a negative only 4 cm wide, but full 12 cm width.
Holgamods forgot to cut the mask. You only have to cut the top and the bottom. I got it done myself. This is what it should be.
camera came with 2 accessory holders, to be glued where you want them.
So you can attach a flash, a rangefinder or a light meter.
conversion is well made, all custom parts are solid and beyond basic 3D
printing. Randy installed a viewfinder and even painted the whole
camera to give it a matte black finish. Handling is like the WPC. Loading film
is easy, you slide the metal bars on each side down and the back
comes off. Install the spools as usual, it's all cheap bendable
plastic, but it works. Safely engage the film lead and close the back. The according red window is 12 for 6x12. Advance
the film via the knob until the number "1" appears in the window. You
are now ready for the first photo. Setting speed and aperture depends on your lens.
taken your photo you have to advance your film to the next picture. As
the film numbering visible in the red window is for 6x6
format and you are using the double (6x12) you have to
advance to the next uneven number (1...3...5...7...). DO NOT FORGET
THIS. So the last (6th) photo is at "11", and then
camera is light and easy to use. As the base is a Holga, it' all
plastic. But there are no 6x12 alteratives within this price range. A
professional 6x12 camera will cost several thousands. Depending on the
lens you chose, this camera can deliver good panoramic results for
my camera does not focus to infinity. I will try to work out how this
could be arranged. The close focussing capabilities are superb. My
lens, a very old large format lens, shows more vignetting than
expected. So here are the first pictures:
∞. The background is not as sharp as it shoud be. Calais harbour, ferry port.
∞. At this aperture the background buildings should be sharp. Calais
harbour, fishermen's sale stands and Calais Nord in the background.
F8, closest focus, 1/50s. Everything is sharp, it's 50 to 80 cm. Even the pavement at about 1m is in focus. An old canon at Calais harbour. The lens shows quite some vignetting at F 8.